GranoCem Screed™
GranoCem Screed is a granolithic concrete material that strengthens and colours cement screeds.
It is a special blend of cement with very hard-wearing aggregates, lime fast pigments and certain additives.
It sets rock-hard, has exceptional abrasion resistance and reduces drying shrinkage. This is your hardcore flooring product! Ideally, the Substrate should be a concrete slab that is at least 3-4 weeks old, sound, hard, well cured, clean and free from paint, dirt, dust, oil, glue, tar, old loose cement or any other contamination that could prevent the proper bonding of the topping (screed) to the Substrate.


Also note that all thick underfloor heating, conduit pipes, plumbing pipes, cables of all sorts or any other objects to be under GranoCem Screed floors, should be recessed in and tightly fitted to level or below the top surface of the Substrate, to prevent any unnecessary cracking of the application.
GranoCem Screed is available in 16 colours.
THE FULL GranoCem Screed KIT CONSISTS OF:

Please follow the Application Guide at all times..
Each product component is necessary to activate the full process.
For more info please contact:
info@nationalcrete.co.za
GranoCem Screed Kit

• Granocem Screed: Is a granolithic concrete material that strengthens and colours cement screeds.
A minimum thickness of 30 to 40mm must be allowed for a GranoCem Screed floor. A ±30mm cement topping(screed) is cast, compacted and struck to level. Then the pre-mixed colour cement is applied simultaneously to a thickness of 3-6mm to the wet surface of the cement topping(screed), wood floated and then steel floated. This will create a smooth, mottled and beautiful old look to the floor. For interior and exterior use.
• Finishing Liquid: Finishing Liquid is used to complete the application.
Activator Liquid: Activating Cementious Colour Cement Flooring Powders
DO NOT USE WATER with this liquid.
• Crete Undercoat:
Stabilises the colour continuity and serves as a second Primer prior to the final Sealant application
• Industrial Crete Coating: A Twin Pack Polyurethane Sealant.
Depending on the actual application used.


