A MUST HAVE ON EVERY BUILDING AND PAINTING SITE.

Our most popular widest used product. A unique water-based primer that has MULTI-FUNCTIONALITY properties for a Multitude of Substrates. To be used on site as a Waterproofing Barrier, as a Bonding liquid mixed in with Tile Cement, or any other Cementitious products on site. A Wall Primer with its many attributes.

You will never use another Primer again!!

There are two different CemFloor Repairs to choose from. A Self-Levelling flow for a smooth repair or a CemFloor Repair with Crusher Dust for your more aggressive floor repair for fixing bigger holes and badly damaged floors. Repair that never fails, Both the CemFloor Repairs have built-in WATERPROOFING SYSTEMS and a CRACK-FREE component that makes this floor repair a far superior product in the market. Making a Floor Repair, easier (met die res van die bewoording soos dit nou is.

WallPlaster is a coloured liquid, cement-based formula, applied as a skim coat of 3mm thick onto an existing wall.

​

WallPlaster creates a distinctly unique mottled look. National Crete Manufacturers do not recommend that any WallPlaster be done in showers unless you are experienced in the application thereof, this is for various reasons such as, rising damp, ineffective waterproofing, penetration of water into crevices where floor and wall meet, etc. Wallplaster is suitable for interior and exterior use.

​

​

​

​

​

Colour FloorPlaster is a beautiful mottled floor application with patterns similar to the GranoCem Screed product range.

Colour FloorPlaster will be your selection if you prefer the mottled pattern but lack the floor height of ±35mm for a GranoCem Screed floor.

It is a special blend of cement with very hard-wearing aggregates, lime fast pigments and certain additives. It sets rock-hard, has exceptional abrasion resistance and reduces drying shrinkage.

This is your hardcore flooring product. This product can be done in the most amazing slopes outside pool areas, verandas, showers, anywhere you need water to flow a certain direction. It is done with a Substrate of 25+mm simultaneously. Ideally for New houses, new Substrates and Garden Landscaping lay-outs.

There are different Coatings / Sealants for different applications. All the Coatings need a Crete Undercoat as a bonding agent. 

​

The Twin Pack Coatings / Sealants are Polyurethane products. Refer to Technical Information for applications

Self-Levelling Crete is a coloured liquid and is cast to a thickness of 3-4mm.

Its appearance is seamless, smooth and very slightly mottled and needs no expansion joints, although part of the full application may finish on one day in a discreet position, and then be continued the next day, for instance under a closed door, which might then need a cover strip.