top of page

Making a Floor Repair, easier, faster with a 25Mpa within

24 hours ………. the secret of any floor-success

is in the Substrate!

CemFloor Repair™

A Repair that never fails, with a built-in waterproofing system

A Crack-Free component was built into the material to reduce liability to the Installer. It prevents any maintenance costs. More than 90% of the raw materials are imported from Europe and the USA, ensuring a superior product. It is fashionable and cost-effective.

CemFloor Repair™ a Self-Levelling Flow that flows easily and can be used from as thin as a scraper coat, and as a Self-Levelling repair that slumps to a thickness up to 4mm as required.

CemFloor Repair™ WITH Crusher Dust for your thicker requirement, where you have badly damaged floors with an application up to your desired thickness.

CemFloor reapair self leveling.png

CemFloor Repair™, a Self-Levelling Flow is used as a Floor Underlay for floor toppings such as Tiles, Carpets, Novilon, Tile-carpets, Wooden Decks, Wooden Floors, Cementitious Floors or as a Floor Repair for Cementitious Substrates.

It flows easily and covers the Substrate uniformly. A Floor Repair with a built-in waterproofing system.

The product is to be used in combination with the CretePrimer™. All floors, regardless of any topping, need a Cementitious Primer, the CretePrimer™ is specifically designed for a perfect bond between the Substrate and the CemFloor Repair™. 

  • CemFloor Repair™ contains a built-in waterproofing system to avoid any water penetration of the surface and no rising damp formed.

  • Mix 6 litres of water with the content of this bag, adding the powder into the water intermittently while mixing

  • It is used as an underlay that can be applied 1-4mm thick. It flows easily and sets rock hard within two hours.

  • It contains a high Mpa and spread across 8-10m² per bag depending on the thickness.

  • This can also be applied on top of tiles i.e.(Terracotta), depending on the quality of each tile, prior to a Colour Cement Floor finish or any other Floor Topping thereafter.

  • CretePrimer™ MUST be applied prior to every CemFloor Repair™ onto the unprepared Substrate, ensuring a perfect bond between the Substrate and the CemFloor Repair™. 

  • The deep penetrating CretePrimer™ binds all the fine loose particles on the surface to avoid delamination.

  • CretePrimer™ is a quick drying, white liquid that dries within 10-20 minutes. It is white when it is applied and clear once it is dry.

Self Leveling_edited.jpg
CemFloor reapair with crusher dust.png

The CemFloor Repair™, WITH Crusher Dust is used as a Floor Underlay for your thicker requirement with an application up to your desired thickness, where you need to cover big holes in the floor or to level the floor to a specific height. Make use of an aluminium straight-edge and a spirit level to ensure a levelled Substrate

  • CemFloor Repair™ contains a built-in waterproofing system to avoid any water penetration of the surface and no rising damp formed.

  •  Mix 6 litres of water with the content of this bag, adding the powder into the water intermittently while mixing

  • It contains a high Mpa and spread across 4-6m² per bag depending   on the thickness.

  • This can also be applied on top of tiles i.e.(Terracotta), depending on the quality of each tile, prior to a Colour Cement Floor finish or any other Floor Topping thereafter.

  • CretePrimer™ MUST be applied prior to every CemFloor Repair™ onto the unprepared Substrate, ensuring a perfect bond between the Substrate and the CemFloor Repair™. 

  • The deep penetrating CretePrimer™ binds all the fine loose particles on the surface to avoid delamination.

  • CretePrimer™ is a quick drying, white liquid that dries within 10-20 minutes. It is white when it is applied and clear once it is dry.

With Crusherdust_edited.png

ALWAYS REFER TO THE NATIONAL CRETE MANUFACTURERS’ APPLICATION GUIDE

bottom of page